Fuzz and penetration testing an industrial gateway for the Cyber Resilience Act and IEC 62443-4-2
A recurring security test cycle for an industrial gateway: fuzzing, penetration tests and SBOMs mapped to IEC 62443-4-2 and the CRA.
Proof
Case Studies
Staffing and testing case studies for automotive, embedded, semiconductor and defence: the problem, the solution, how it is implemented and how success is measured.
Planning MIL-STD-810H and MIL-STD-461 pre-compliance for an indigenised rugged subsystem
Tailoring MIL-STD-810H and 461 requirements, writing procedures, running pre-scans and preparing a rugged LRU for its accredited lab campaign.
Closing DO-178C structural coverage with independent verification for a DAL B component
Independent verification closes statement and decision coverage, coupling analysis and tool qualification for a DAL B software component.
Converting ATE test programs from Teradyne J750 to Advantest V93000 for an OSAT line
Porting a microcontroller family's final-test programs from J750 to V93000, with correlation, test-time analysis and STDF checks before release.
Staffing post-silicon validation automation and PVT characterization for a power-management IC
Test engineers in the customer's lab build Python and PyVISA automation, support PMIC bring-up and run PVT characterization sweeps.
Moving ADAS testing from the track to scenario-based SIL and HIL ahead of Euro NCAP 2026
Building an OpenSCENARIO catalogue, SIL and HIL pipelines and a coverage argument so ADAS testing no longer depends on track days.
Setting up BMS HIL testing and nightly regression with ISO 26262 traceability
Commissioning a BMS HIL bench, automating nightly regression with fault insertion and tracing each result to ISO 26262 safety requirements.
Setting up a 25-engineer embedded validation team in Bengaluru through Build-Operate-Transfer
A 25-engineer embedded validation team built, run and then transferred to a mid-sized company's Bengaluru GCC over 12 to 18 months.
Embedding a functional safety and cybersecurity pod with an EV start-up
A dedicated pod for ISO 26262 safety analysis and ISO/SAE 21434 TARA, embedded with an EV start-up preparing UNECE R155 type approval evidence.
Staffing DO-178C verification engineers ahead of SOI audits
DO-178C verification engineers for an avionics supplier before SOI audits: requirements-based tests, structural coverage, review checklists and independence.
Tell us your domain, standard and team size — get a scoped brief in 2 minutes.